Polyacetal homopolymer TECAFORM AD
POM-H TECAFORM AD
ДСТУ EN ISO 29988-1:2022
ДСТУ EN 15860:2022
EN ISO 29988-1:2019
EN 15860:2018
ISO 29988-1:2019
Plastics and polymers
Ensinger extruded polyacetal homopolymer stock with higher stiffness and strength for gears and sliding parts.
TECAFORM AD
TECAFORM AD natural
Gears
Bushings and sleeves
Wear parts
Turned parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyethylene terephthalate TECAPET
PET TECAPET
ДСТУ EN ISO 20028-1:2022
ДСТУ EN 15860:2022
EN ISO 20028-1:2019
EN 15860:2018
ISO 20028-1:2019
Plastics and polymers
Ensinger semi-crystalline PET stock for dimensionally stable sliding parts, bushings, guides and insulators.
TECAPET
TECAPET white
Wear parts
Bushings and sleeves
Turned parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Polybutylene terephthalate Ultradur B 4500
PBT Ultradur B 4500
ДСТУ EN ISO 20028-1:2022
EN ISO 20028-1:2019
ISO 20028-1:2019
Plastics and polymers
Medium-viscosity BASF PBT for injection-moulded parts, films, thin-walled profiles and tubes.
Ultradur B 4500
Ultradur B4500
Housings and covers
Electrical insulation
Pipes and tubes
Properties, analogues, sources, notes and hardness need a paid account.
Polybutylene terephthalate GF30 Ultradur B 4300 G6 HR
PBT-GF30 Ultradur B 4300 G6 HR
ДСТУ EN ISO 20028-1:2022
EN ISO 20028-1:2019
ISO 20028-1:2019
Plastics and polymers
BASF PBT with 30 % glass fibres and higher hydrolysis resistance for connectors and housings of electronic units.
Ultradur B 4300 G6 HR
Ultradur B4300 G6 HR
Housings and covers
Electrical insulation
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
PTFE Teflon granular moulding resin
PTFE Teflon granular
ДСТУ EN ISO 13000-1:2022
ДСТУ EN ISO 20568-1:2022
EN ISO 13000-1:2021
EN ISO 20568-1:2017
ISO 13000-1:2021
ISO 20568-1:2017
Plastics and polymers
Compression-moulded and sintered PTFE of the Teflon granular resins for seals, sliding parts, chemically resistant and insulating parts.
Teflon PTFE granular
Seals and gaskets
Wear parts
Corrosion-resistant parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Fluoroplast-4 (PTFE)
Фторопласт-4
ГОСТ 10007-80
Plastics and polymers
Polytetrafluoroethylene of GOST 10007 for seals, sliding parts, chemically resistant and insulating parts from -269 to +260 °C.
Fluoroplast-4
Фторопласт 4
Seals and gaskets
Wear parts
Corrosion-resistant parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone TECAPEEK
PEEK TECAPEEK
ДСТУ EN ISO 23153-1:2022
ДСТУ EN 15860:2022
EN ISO 23153-1:2020
EN 15860:2018
ISO 23153-1:2020
Plastics and polymers
Ensinger unfilled PEEK stock for sliding parts, bushings, seals and chemically resistant parts up to 260 °C.
TECAPEEK natural
Wear parts
Bushings and sleeves
Heat-resistant parts
Corrosion-resistant parts
Turned parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone GF30 TECAPEEK GF30
PEEK-GF30 TECAPEEK GF30
ДСТУ EN ISO 23153-1:2022
ДСТУ EN 15860:2022
EN ISO 23153-1:2020
EN 15860:2018
ISO 23153-1:2020
Plastics and polymers
Ensinger PEEK stock with 30 % glass fibres for stiff structural and electrical insulating parts up to 260 °C.
TECAPEEK GF30
TECAPEEK GF30 natural
Structural parts
Heat-resistant parts
Electrical insulation
Turned parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone CF30 TECAPEEK CF30
PEEK-CF30 TECAPEEK CF30
ДСТУ EN ISO 23153-1:2022
ДСТУ EN 15860:2022
EN ISO 23153-1:2020
EN 15860:2018
ISO 23153-1:2020
Plastics and polymers
Ensinger PEEK stock with 30 % carbon fibres for stiff sliding parts and bushings up to 260 °C.
TECAPEEK CF30
TECAPEEK CF30 black
Wear parts
Bushings and sleeves
Heat-resistant parts
Turned parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone Victrex 450G
PEEK Victrex 450G
ДСТУ EN ISO 23153-1:2022
EN ISO 23153-1:2020
ISO 23153-1:2020
Plastics and polymers
Unfilled standard-flow Victrex PEEK for injection-moulded and extruded parts with high strength, chemical resistance and service temperature.
VICTREX PEEK 450G
Structural parts
Wear parts
Heat-resistant parts
Corrosion-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone GF30 Victrex 450GL30
PEEK-GF30 Victrex 450GL30
ДСТУ EN ISO 23153-1:2022
EN ISO 23153-1:2020
ISO 23153-1:2020
Plastics and polymers
Victrex PEEK with 30 % glass fibres for stiff moulded structural and electrical insulating parts at high temperature.
VICTREX PEEK 450GL30
Structural parts
Heat-resistant parts
Electrical insulation
Housings and covers
Properties, analogues, sources, notes and hardness need a paid account.
Polyetheretherketone CF30 Victrex 450CA30
PEEK-CF30 Victrex 450CA30
ДСТУ EN ISO 23153-1:2022
EN ISO 23153-1:2020
ISO 23153-1:2020
Plastics and polymers
Victrex PEEK with 30 % carbon fibres for the stiffest moulded parts, sliding parts and bushings.
VICTREX PEEK 450CA30
Structural parts
Wear parts
Bushings and sleeves
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyethylene PE-UHMW GEHR (PE 1000)
GEHR PE-UHMW
ДСТУ EN ISO 15527:2022
ДСТУ EN 15860:2022
EN ISO 15527:2022
EN 15860:2018
EN ISO 11542-1:2001
ISO 15527:2022
ISO 11542-1:2001
Plastics and polymers
Ultra-high-molecular-weight polyethylene (PE 1000) stock shapes of GEHR for sliding and wear parts, guides, liners and chemical-resistant parts.
Wear parts
Bushings and sleeves
Corrosion-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyethylene PE 500 SIMONA
SIMONA PE 500
ДСТУ EN ISO 15527:2022
ДСТУ EN ISO 17855-1:2022
EN ISO 15527:2022
EN ISO 17855-1:2014
ISO 15527:2022
ISO 17855-1:2014
Plastics and polymers
High-molecular-weight PE-HD (PE 500) sheets of SIMONA for wear plates, cutting boards, conveyor and food-processing parts and chemical-resistant liners.
Wear parts
Structural parts
Corrosion-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Low density polyethylene PE-LD Lupolen 1800 H
PE-LD Lupolen 1800 H
ДСТУ EN ISO 17855-1:2022
EN ISO 17855-1:2014
ISO 17855-1:2014
Plastics and polymers
Low density polyethylene of LyondellBasell for injection-moulded flexible parts, lids, blow-moulded products and film.
Lupolen 1800 H
Lupolen 1800H
Housings and covers
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
Polypropylene PP-H SIMONA AlphaPlus
SIMONA PP-H AlphaPlus
ДСТУ EN ISO 15013:2022
ДСТУ EN ISO 19069-1:2022
EN ISO 15013:2022
EN ISO 19069-1:2015
ISO 15013:2022
ISO 19069-1:2015
Plastics and polymers
Polypropylene homopolymer sheets of SIMONA for welded chemical tanks, apparatus, ventilation and chemical-resistant parts.
PP-H AlphaPlus
Corrosion-resistant parts
Welded structures
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
Polypropylene PP-C SIMONA
SIMONA PP-C
ДСТУ EN ISO 15013:2022
ДСТУ EN ISO 19069-1:2022
EN ISO 15013:2022
EN ISO 19069-1:2015
ISO 15013:2022
ISO 19069-1:2015
Plastics and polymers
Polypropylene block copolymer sheets of SIMONA for welded tanks and parts that need impact strength down to -20 °C.
Corrosion-resistant parts
Welded structures
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
Glass-fibre polypropylene GEHR PP-30GF
GEHR PP-30GF
ДСТУ EN ISO 19069-1:2022
ДСТУ EN 15860:2022
EN ISO 19069-1:2015
EN 15860:2018
ISO 19069-1:2015
Plastics and polymers
Polypropylene with 30 % glass fibre, stock shapes of GEHR for rigid, chemical-resistant machined parts with low creep.
Structural parts
Corrosion-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Unplasticized PVC GEHR PVC-U
GEHR PVC-U
ДСТУ EN ISO 21306-1:2022
ДСТУ EN 15860:2022
EN ISO 21306-1:2019
EN 15860:2018
ISO 21306-1:2019
Plastics and polymers
Unplasticized PVC (вініпласт type) stock shapes of GEHR for chemical apparatus, tanks, fittings, electrical insulation and machined parts.
Corrosion-resistant parts
Welded structures
Electrical insulation
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
ABS Terluran GP-22
ABS Terluran GP-22
ДСТУ EN ISO 19062-1:2022
EN ISO 19062-1:2015
ISO 19062-1:2015
Plastics and polymers
Easy-flow general-purpose ABS of INEOS Styrolution for injection-moulded housings, covers and appliance parts.
Terluran GP-22
Terluran GP22
Housings and covers
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
ABS stock shapes GEHR ABS
GEHR ABS
ДСТУ EN ISO 19062-1:2022
ДСТУ EN 15860:2022
EN ISO 19062-1:2015
EN 15860:2018
ISO 19062-1:2015
Plastics and polymers
ABS stock shapes (rods and sheets) of GEHR for machined housings, fixtures, models and covers.
Housings and covers
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
Polycarbonate Makrolon 2805
PC Makrolon 2805
ДСТУ EN ISO 21305-1:2022
EN ISO 21305-1:2019
ISO 21305-1:2019
Plastics and polymers
General-purpose medium-viscosity polycarbonate of Covestro for transparent, impact-resistant moulded housings, covers, lenses and technical parts.
Makrolon 2805
Housings and covers
Glazing and transparent parts
Structural parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Polycarbonate GEHR PC
GEHR PC
ДСТУ EN ISO 21305-1:2022
ДСТУ EN 15860:2022
EN ISO 21305-1:2019
EN 15860:2018
ISO 21305-1:2019
Plastics and polymers
Polycarbonate stock shapes (rods and sheets) of GEHR for transparent, impact-resistant machined parts, guards and electrical insulation.
Glazing and transparent parts
Housings and covers
Structural parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Glass-fibre polycarbonate Makrolon 8035
PC-GF30 Makrolon 8035
ДСТУ EN ISO 21305-1:2022
EN ISO 21305-1:2019
ISO 21305-1:2019
Plastics and polymers
Polycarbonate with 30 % glass fibre of Covestro for rigid, dimensionally stable precision parts, housings and frames.
Makrolon 8035
Housings and covers
Structural parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
