Ceramic insulating material C 620
C 620
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 620 (mullite ceramic with 65-80 % Al2O3) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 780
C 780
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 780 (alumina with 80-86 % Al2O3) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 810
C 810
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 810 (dense beryllium oxide) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 820
C 820
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 820 (porous magnesium oxide) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 910
C 910
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 910 (aluminium nitride) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 930
C 930
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 930 (reaction-bonded silicon nitride) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Ceramic insulating material C 935
C 935
ДСТУ EN 60672-3:2022
EN 60672-3:1997
Ceramics
Technical ceramic of EN 60672-3 type C 935 (dense silicon nitride) for electrical insulating and heat-resistant parts.
Electrical insulation
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Acetal copolymer POM-GF26 Hostaform C 9021 GV1/30
POM-GF26 Hostaform C 9021 GV1/30
ДСТУ EN ISO 29988-1:2022
EN ISO 29988-1:2019
ISO 29988-1:2019
Plastics and polymers
Celanese POM copolymer reinforced with about 26 % glass fibres for moulded parts with very high strength, rigidity and hardness and reduced thermal expansion.
Hostaform C 9021 GV1/30
Structural parts
Housings and covers
Properties, analogues, sources, notes and hardness need a paid account.
PC+ABS blend Bayblend T65 XF
PC+ABS Bayblend T65 XF
ДСТУ EN ISO 1043-1:2022
EN ISO 1043-1:2011
ISO 1043-1:2011
Plastics and polymers
Covestro unreinforced polycarbonate + ABS blend with improved flow and Vicat B/120 temperature 120 °C for moulded housings, panels and covers.
Bayblend T65 XF
Housings and covers
Properties, analogues, sources, notes and hardness need a paid account.
Liquid crystal polymer LCP-GF30 Vectra A130
LCP-GF30 Vectra A130
ДСТУ EN ISO 1043-1:2022
EN ISO 1043-1:2011
ISO 1043-1:2011
Plastics and polymers
Celanese liquid crystal polymer with 30 % glass fibres, inherently flame retardant, with very low expansion along the flow for thin-walled electronic and precision mouldings fit for soldering.
Vectra A130
Electrical insulation
Housings and covers
Properties, analogues, sources, notes and hardness need a paid account.
Thermoplastic polyester elastomer TPC-ET Hytrel 5526
TPC-ET Hytrel 5526
ДСТУ EN ISO 18064:2017
EN ISO 18064:2014
ISO 18064:2014
Elastomers
DuPont 55 Shore D thermoplastic polyester elastomer for injection-moulded bellows, boots, seals, hoses and shock-absorbing parts.
Hytrel 5526
Seals and gaskets
Vibration and shock damping
Properties, analogues, sources, notes and hardness need a paid account.
Polyethersulfone PESU Ultrason E 2010
PESU Ultrason E 2010
ДСТУ EN ISO 24025-1:2022
EN ISO 24025-1:2020
ISO 24025-1:2020
Plastics and polymers
BASF unreinforced medium-viscosity polyethersulfone with high heat resistance and dimensional stability for moulded electrical parts, headlight and heating system components and microwave dishes.
Ultrason E 2010
Heat-resistant parts
Electrical insulation
Properties, analogues, sources, notes and hardness need a paid account.
Polyphthalamide PA6T/6I-GF30 Grivory HT1V-3 FWA
PA6T/6I-GF30 Grivory HT1V-3 FWA
ДСТУ EN ISO 16396-1:2022
EN ISO 16396-1:2015
ISO 16396-1:2015
Plastics and polymers
EMS-GRIVORY polyphthalamide with 30 % glass fibres, hydrolysis resistant and approved for drinking water and food contact, for stiff heat-resistant pump, fitting and appliance parts.
Grivory HT1V-3 FWA
Grivory HT1V-3 FWA nat
Structural parts
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyamide PA46 Stanyl TW341
PA46 Stanyl TW341
ДСТУ EN ISO 16396-1:2022
EN ISO 16396-1:2015
ISO 16396-1:2015
Plastics and polymers
DSM heat-stabilized and lubricated unreinforced polyamide 46 with a high melting point for gears, engine parts and wear-resistant mouldings.
Stanyl TW341
Gears
Wear parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyamide-imide PAI Torlon 4203L
PAI Torlon 4203L
ДСТУ EN ISO 1043-1:2022
EN ISO 1043-1:2011
ISO 1043-1:2011
Plastics and polymers
Solvay unreinforced lubricated polyamide-imide with the highest strength and stiffness of thermoplastics up to 275 °C for thrust washers, bushings, bearings, valve seats, wear rings and electrical parts.
Torlon 4203L
Wear parts
Bushings and sleeves
Heat-resistant parts
Properties, analogues, sources, notes and hardness need a paid account.
Polyethersulfone PESU-GF30 Ultrason E 2010 G6
PESU-GF30 Ultrason E 2010 G6
ДСТУ EN ISO 24025-1:2022
EN ISO 24025-1:2020
ISO 24025-1:2020
Plastics and polymers
BASF polyethersulfone with 30 % glass fibres, medium viscosity, for stiff dimensionally stable moulded parts at high temperature.
Ultrason E 2010 G6
Heat-resistant parts
Structural parts
Properties, analogues, sources, notes and hardness need a paid account.
Wear-resistant steel Creusabro 4800
Creusabro 4800
ISO/TR 15608:2017
Ferrous metals
Industeel wear-resistant plate with a guaranteed hardness of 350-420 HB that work-hardens by about 70 HB in service and works up to 450 °C: bucket, hopper and chute liners, crusher parts, dumper bodies.
Creusabro 4800
Wear parts
Properties, analogues, sources, notes and hardness need a paid account.
Wear-resistant steel Creusabro 8000
Creusabro 8000
ISO/TR 15608:2017
Ferrous metals
Industeel wear- and impact-resistant plate with a guaranteed hardness of 430-500 HB that work-hardens by about 70 HB in service and works up to 450 °C: bucket edges and liners, hopper and chute liners, crusher parts.
Creusabro 8000
Wear parts
Properties, analogues, sources, notes and hardness need a paid account.
