Beam: I/H · DSTU 8768
DSTU 8768:2018 10
DSTU 8768:2018 - Hot-rolled steel I-beams - Dimensions
Automatically build standard products in SOLIDWORKS with TSFP.
DSTU 8768:2018 10
| Profile form | hot_rolled |
|---|---|
| Section series | I |
| Designation | 10 |
| Section height | 100 mm |
| Section width | 55 mm |
| Web thickness | 4.5 mm |
| Flange thickness | 7.2 mm |
| Root radius | 7 mm |
| Toe radius | 2.5 mm |
| Minimum flange slope | 6 % |
| Maximum flange slope | 12 % |
| Flange thickness reference offset | 14.875* mm |
| Section area | 12 cm2 |
| Mass per metre | 9.46 kg/m |
| Second moment of area, major axis | 198 cm4 |
| Second moment of area, minor axis | 17.9 cm4 |
| Section modulus, major axis | 39.7 cm3 |
| Section modulus, minor axis | 6.49 cm3 |
| Radius of gyration, major axis | 4.06 cm |
| Radius of gyration, minor axis | 1.22 cm |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.