Beam: I/H · DSTU 8768
DSTU 8768:2018 12
DSTU 8768:2018 - Hot-rolled steel I-beams - Dimensions
Automatically build standard products in SOLIDWORKS with TSFP.
DSTU 8768:2018 12
| Profile form | hot_rolled |
|---|---|
| Section series | I |
| Designation | 12 |
| Section height | 120 mm |
| Section width | 64 mm |
| Web thickness | 4.8 mm |
| Flange thickness | 7.3 mm |
| Root radius | 7.5 mm |
| Toe radius | 3 mm |
| Minimum flange slope | 6 % |
| Maximum flange slope | 12 % |
| Flange thickness reference offset | 17.2* mm |
| Section area | 14.7 cm2 |
| Mass per metre | 11.5 kg/m |
| Second moment of area, major axis | 350 cm4 |
| Second moment of area, minor axis | 27.9 cm4 |
| Section modulus, major axis | 58.4 cm3 |
| Section modulus, minor axis | 8.72 cm3 |
| Radius of gyration, major axis | 4.88 cm |
| Radius of gyration, minor axis | 1.38 cm |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.