Beam: I/H · DSTU 8768
DSTU 8768:2018 20
DSTU 8768:2018 - Hot-rolled steel I-beams - Dimensions
Automatically build standard products in SOLIDWORKS with TSFP.
DSTU 8768:2018 20
| Profile form | hot_rolled |
|---|---|
| Section series | I |
| Designation | 20 |
| Section height | 200 mm |
| Section width | 100 mm |
| Web thickness | 5.2 mm |
| Flange thickness | 8.4 mm |
| Root radius | 9.5 mm |
| Toe radius | 4 mm |
| Minimum flange slope | 6 % |
| Maximum flange slope | 12 % |
| Flange thickness reference offset | 26.3* mm |
| Section area | 26.8 cm2 |
| Mass per metre | 21 kg/m |
| Second moment of area, major axis | 1840 cm4 |
| Second moment of area, minor axis | 115 cm4 |
| Section modulus, major axis | 184 cm3 |
| Section modulus, minor axis | 23.1 cm3 |
| Radius of gyration, major axis | 8.28 cm |
| Radius of gyration, minor axis | 2.07 cm |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.