Beam: I/H · DSTU 8768
DSTU 8768:2018 24
DSTU 8768:2018 - Hot-rolled steel I-beams - Dimensions
Automatically build standard products in SOLIDWORKS with TSFP.
DSTU 8768:2018 24
| Profile form | hot_rolled |
|---|---|
| Section series | I |
| Designation | 24 |
| Section height | 240 mm |
| Section width | 115 mm |
| Web thickness | 5.6 mm |
| Flange thickness | 9.5 mm |
| Root radius | 10.5 mm |
| Toe radius | 4 mm |
| Minimum flange slope | 6 % |
| Maximum flange slope | 12 % |
| Flange thickness reference offset | 30.15* mm |
| Section area | 34.8 cm2 |
| Mass per metre | 27.3 kg/m |
| Second moment of area, major axis | 3460 cm4 |
| Second moment of area, minor axis | 198 cm4 |
| Section modulus, major axis | 289 cm3 |
| Section modulus, minor axis | 34.5 cm3 |
| Radius of gyration, major axis | 9.97 cm |
| Radius of gyration, minor axis | 2.37 cm |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.