Beam: I/H · DSTU 8768
DSTU 8768:2018 30
DSTU 8768:2018 - Hot-rolled steel I-beams - Dimensions
Automatically build standard products in SOLIDWORKS with TSFP.
DSTU 8768:2018 30
| Profile form | hot_rolled |
|---|---|
| Section series | I |
| Designation | 30 |
| Section height | 300 mm |
| Section width | 135 mm |
| Web thickness | 6.5 mm |
| Flange thickness | 10.2 mm |
| Root radius | 12 mm |
| Toe radius | 5 mm |
| Minimum flange slope | 6 % |
| Maximum flange slope | 12 % |
| Flange thickness reference offset | 35.375* mm |
| Section area | 46.5 cm2 |
| Mass per metre | 36.5 kg/m |
| Second moment of area, major axis | 7080 cm4 |
| Second moment of area, minor axis | 337 cm4 |
| Section modulus, major axis | 472 cm3 |
| Section modulus, minor axis | 49.9 cm3 |
| Radius of gyration, major axis | 12.3 cm |
| Radius of gyration, minor axis | 2.69 cm |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.