Seal: O-ring · ISO 3601-1
ISO 3601-1 O-ring 002 1.07x1.27
ISO 3601-1 - Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes
Automatically build standard products in SOLIDWORKS with TSFP.
ISO 3601-1 002 1.07x1.27
| Inner diameter | 1.07 mm |
|---|---|
| Cross-section diameter | 1.27 mm |
| Centerline diameter | 2.34* mm |
| Outer diameter | 3.61* mm |
| Nominal size code | 002 |
* Calculated value: worked out from the dimensions the standard specifies, not listed in the standard itself.