Materials

Plastics and polymers

Cast acrylic (PMMA) sheet of Röhm, the оргскло for glazing, covers, guards, sight glasses, displays and machined transparent parts.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Extruded acrylic (PMMA) sheet of Röhm, the оргскло for glazing, light covers, displays and thermoformed parts.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger polyamide 12 stock with very low moisture uptake for dimensionally stable sliding parts, bushings and parts in humid service.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Röchling polyamide 12 stock with 30 % glass fibres for stiff, dimensionally stable machined parts with low moisture uptake.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Celanese PPS with 40 % glass fibres, inherently flame retardant, for chemically and thermally stressed moulded parts such as pump and valve parts, heater housings and coil formers.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger PPS stock with 40 % glass fibres for stiff, creep-resistant and chemically resistant machined parts up to 230 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger amorphous polyetherimide stock for heat-resistant, electrical insulating and sterilizable parts up to 170 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger polyetherimide stock with 30 % glass fibres for stiff, creep-resistant insulating and structural parts up to 170 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger PVDF stock for chemically resistant parts of pumps, valves and fittings, sliding parts and insulating parts up to 140 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

MCAM mica-filled PTFE stock with nine times less deformation under load than virgin PTFE and expansion close to aluminium, for seals, valve seats, bearings and bushings up to 260 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

MCAM food-contact compliant mica-filled PTFE stock with the lowest friction of the Fluorosint grades, for bearings, bushings, seats and seals in food, pharmaceutical and chemical processing up to 260 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger amorphous polysulfone stock for stiff, dimensionally stable electrical insulating, food-processing and sterilizable parts up to 160 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Ensinger polyphenylsulfone stock (medical-technology grade) for tough, hydrolysis-resistant parts that are steam sterilized repeatedly, up to 170 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Prusa Polymers PLA filament for FDM printing: stiff, easy-to-print prototypes, fixtures and covers for service below 55 °C (HDT).

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Prusa Polymers PETG filament for FDM printing: tougher than PLA with low moisture uptake, for functional prototypes, housings and brackets (HDT 68 °C).

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

EOS polyamide 12 powder for laser sintering (SLS): functional prototypes and end-use parts with hinges, snap fits and threads, housings and brackets.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

HP polyamide 12 powder for Multi Jet Fusion (MJF) printing: functional prototypes and end-use parts, housings and brackets.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Prusa Polymers ASA filament for FDM printing: UV-stable housings, covers and parts for outdoor use, HDT 93 °C at 0.45 MPa.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

EOS polyamide 12 powder with 40 % glass beads for laser sintering (SLS): stiff, wear-resistant parts, machine housings and forming tools.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

Prusa Polymers carbon-fibre polyamide 11 filament for FDM printing: stiff, heat-resistant functional parts, jigs and fixtures (HDT 192 °C at 0.45 MPa); needs a hardened nozzle.

Properties, analogues, sources, notes and hardness need a paid account.

Plastics and polymers

HP polyamide 12 powder with 40 % glass beads for Multi Jet Fusion (MJF) printing: stiff, dimensionally stable enclosures, housings, fixtures and tooling.

Properties, analogues, sources, notes and hardness need a paid account.

Composites

Epoxy resin sheet with woven glass fabric of EN 60893-3-2 for mechanical and electrical insulating parts, temperature index 130 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Composites

Flame-retardant epoxy resin sheet with woven glass fabric of EN 60893-3-2 for mechanical and electrical insulating parts, temperature index 130 °C.

Properties, analogues, sources, notes and hardness need a paid account.

Composites

Epoxy resin sheet with woven glass fabric of EN 60893-3-2 with high strength at elevated temperature, temperature index 155 °C.

Properties, analogues, sources, notes and hardness need a paid account.