Materials

Non-ferrous metals

ГОСТ cast tin-zinc bronze for fittings, antifriction parts, bearing shells, friction parts and propeller shaft liners.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Leaded alpha-beta brass with very good machinability together with good strength, for a wide range of turned parts in the metal industry.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

ГОСТ cast tin-zinc bronze for fittings, pipeline fittings and pumps working in seawater.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Leaded brass that machines well and cold forms very well (embossing, riveting, bending), for parts of precision engineering.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

ГОСТ cast tin-zinc-lead bronze for fittings, antifriction parts and bearing shells.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Dezincification-resistant leaded brass for machined and hot formed fittings and parts in contact with water.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

High-strength special brass with high wear resistance, for structural parts in mechanical engineering, synchronizer rings and valve guide tubes.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Wrought tin bronze combining very good cold formability with strength and hardness, mainly as strip for springs of medium demands and for electrical parts.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

High-conductivity copper-iron alloy, mainly as strip for spring contacts, connectors and lead frames in electrical engineering and electronics.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Alpha brass for cold forming, an economical choice for deep drawn, pressed and bent sheet and strip parts.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Cast leaded brass with good castability and machinability, for die and permanent mould castings: fitting bodies, hardware and small structural parts of machines and instruments.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Precipitation hardening copper-nickel-silicon alloy with high strength, wear and corrosion resistance: screws, connectors, contacts, bearing bushes and springs.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Copper-nickel-tin alloy with very good cold formability and high strength in the spring hard state, low anisotropy of spring properties, for springs and connectors.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Leaded tin-zinc bronze combining strength with good machinability, insensitive to stress corrosion cracking and cold formable: turned electrical parts, bearing shells and valve parts.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Cast gunmetal with useful strength and elongation, good castability and seawater resistance: pump housings and thin-walled complex castings.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Leaded tin bronze combining strength, good machinability and corrosion resistance, for turned parts of electrical engineering and the automotive industry.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Tin-zinc bronze combining strength, hardness and good corrosion resistance, mainly as strip for parts of electrical engineering and vehicle electrics, especially contacts.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Free-machining sulphur-alloyed copper with high electrical and thermal conductivity: turned electrical and electronic parts, welding torch nozzles and screw fittings.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Heat-treatable hypoeutectic Al-Si7-Mg0.6 casting alloy of EN 1706 with the highest strength of the AlSi7Mg group, for highly stressed sand and permanent mould castings such as chassis, wheel and machine parts.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Heat-treatable Al-Si9-Mg casting alloy of EN 1706 with very good castability and high strength after heat treatment, for thin-walled, pressure-tight and highly stressed sand and permanent mould castings.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Near-eutectic Al-Si11 casting alloy of EN 1706 with excellent castability, good ductility and corrosion resistance, used as cast for thin-walled, pressure-tight and impact-loaded castings.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Eutectic Al-Si12-Cu-Ni-Mg piston alloy of EN 1706 with low thermal expansion, high wear resistance and strength at elevated temperatures, for pistons and cylinder heads cast in permanent moulds.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Non-heat-treatable Al-Mg3 casting alloy of EN 1706 with very high corrosion resistance, also in seawater, and excellent polishing and anodising, for decorative castings, fittings and food equipment.

Properties, analogues, sources, notes and hardness need a paid account.

Non-ferrous metals

Non-heat-treatable Al-Mg5-Si casting alloy of EN 1706 with high resistance to seawater and weak alkalis and better castability than AlMg5, for complex castings of food, chemical and marine equipment.

Properties, analogues, sources, notes and hardness need a paid account.