Washer
DIN 433-1
DIN 433-1 - Plain small-series washers, hardness up to 250 HV
Automatically build standard products in SOLIDWORKS with TSFP.
Outdated standardPlain small-series washers to withdrawn DIN 433-1:1990-03, hardness up to 250 HV, designated by the hole diameter. M18 washers are 2.5 mm thick and M36 washers have an outside diameter of 58 mm, unlike ISO 7092. DIN 433-2 specifies the internally chamfered form.
| Product | Inner diameter, mm | Outer diameter, mm | Thickness, mm |
|---|---|---|---|
| DIN 433-1 washer 1.1 | 1.1 | 2.5 | 0.3 |
| DIN 433-1 washer 1.3 | 1.3 | 3 | 0.3 |
| DIN 433-1 washer 1.5 | 1.5 | 3 | 0.3 |
| DIN 433-1 washer 1.7 | 1.7 | 3.5 | 0.3 |
| DIN 433-1 washer 2 | 2 | 4 | 0.3 |
| DIN 433-1 washer 2.2 | 2.2 | 4.5 | 0.3 |
| DIN 433-1 washer 2.7 | 2.7 | 5 | 0.5 |
| DIN 433-1 washer 3.2 | 3.2 | 6 | 0.5 |
| DIN 433-1 washer 3.7 | 3.7 | 7 | 0.5 |
| DIN 433-1 washer 4.3 | 4.3 | 8 | 0.5 |
| DIN 433-1 washer 5.3 | 5.3 | 9 | 1 |
| DIN 433-1 washer 6.4 | 6.4 | 11 | 1.6 |
| DIN 433-1 washer 8.4 | 8.4 | 15 | 1.6 |
| DIN 433-1 washer 10.5 | 10.5 | 18 | 1.6 |
| DIN 433-1 washer 13 | 13 | 20 | 2 |
| DIN 433-1 washer 15 | 15 | 24 | 2.5 |
| DIN 433-1 washer 17 | 17 | 28 | 2.5 |
| DIN 433-1 washer 19 | 19 | 30 | 2.5 |
| DIN 433-1 washer 21 | 21 | 34 | 3 |
| DIN 433-1 washer 25 | 25 | 39 | 4 |
| DIN 433-1 washer 31 | 31 | 50 | 4 |
| DIN 433-1 washer 37 | 37 | 58 | 5 |