TSFP
Back to standards

Washer: square

DIN 436

DIN 436 - Square washers, especially for wood constructions

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Flat square washers, especially for wood constructions, with parallel faces, unlike the square taper washers DIN 434 and DIN 435 for U- and I-sections. The current 2024 edition replaces DIN 436:1990-05 and specifies dimensions, technical delivery conditions and designation.

DIN 436

Geometry

×
Inner diameter
Side length
Thickness
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Inner diameter, mm Side length, mm Thickness, mm
🔒 DIN 436 square washer M10 🔒 🔒 🔒
🔒 DIN 436 square washer M12 🔒 🔒 🔒
🔒 DIN 436 square washer M16 🔒 🔒 🔒
🔒 DIN 436 square washer M20 🔒 🔒 🔒
🔒 DIN 436 square washer M22 🔒 🔒 🔒
🔒 DIN 436 square washer M24 🔒 🔒 🔒
🔒 DIN 436 square washer M27 🔒 🔒 🔒
🔒 DIN 436 square washer M30 🔒 🔒 🔒
🔒 DIN 436 square washer M33 🔒 🔒 🔒
🔒 DIN 436 square washer M36 🔒 🔒 🔒
🔒 DIN 436 square washer M39 🔒 🔒 🔒
🔒 DIN 436 square washer M42 🔒 🔒 🔒
🔒 DIN 436 square washer M45 🔒 🔒 🔒
🔒 DIN 436 square washer M48 🔒 🔒 🔒
🔒 DIN 436 square washer M52 🔒 🔒 🔒