TSFP
Back to standards

Ring: retaining for bores

DIN 472

DIN 472 - Retaining rings for bores - Normal type and heavy type

Automatically build standard products in SOLIDWORKS with TSFP.

Retaining rings for bores, the internal counterpart of the DIN 471 ring for shafts: the ring is compressed to pass through the bore, springs out into a groove in the bore wall, and its lugs with the assembly holes point inward. The rings locate parts such as rolling bearings in bores and transmit axial forces. Made in a normal type and a heavy type. DIN 472:2026-05; a size is the pair of bore diameter and ring thickness, and the heavy type is the thicker ring for the same bore and groove.

DIN 472

Geometry

×
Housing bore diameter
Thickness
Free outer diameter
Lug width
Ring radial width
Lug hole diameter
Groove diameter
Groove width
Minimum groove-to-bore-end distance
Product Ring type Housing bore diameter, mm Thickness, mm Free outer diameter, mm Lug width, mm Ring radial width, mm Lug hole diameter, mm Groove diameter, mm Groove width, mm Minimum groove-to-bore-end distance, mm
DIN 472 retaining ring 160x4 normal normal 160 4 169 13 11.6 4 165 4.15 7.5
DIN 472 retaining ring 165x4 normal normal 165 4 174.5 13 11.8 4 170 4.15 7.5
DIN 472 retaining ring 170x4 normal normal 170 4 179.5 13.5 12.2 4 175 4.15 7.5
DIN 472 retaining ring 175x4 normal normal 175 4 184.5 13.5 12.7 4 180 4.15 7.5
DIN 472 retaining ring 180x4 normal normal 180 4 189.5 14.2 13.2 4 185 4.15 7.5
DIN 472 retaining ring 185x4 normal normal 185 4 194.5 14.2 13.7 4 190 4.15 7.5
DIN 472 retaining ring 190x4 normal normal 190 4 199.5 14.2 13.8 4 195 4.15 7.5
DIN 472 retaining ring 195x4 normal normal 195 4 204.5 14.2 13.8 4 200 4.15 7.5
DIN 472 retaining ring 200x4 normal normal 200 4 209.5 14.2 14 4 205 4.15 7.5
DIN 472 retaining ring 210x5 normal normal 210 5 222 14.2 14 4 216 5.15 9
DIN 472 retaining ring 220x5 normal normal 220 5 232 14.2 14 4 226 5.15 9
DIN 472 retaining ring 230x5 normal normal 230 5 242 14.2 14 4 236 5.15 9
DIN 472 retaining ring 240x5 normal normal 240 5 252 14.2 14 4 246 5.15 9
DIN 472 retaining ring 250x5 normal normal 250 5 262 14.2 14 4 256 5.15 9
DIN 472 retaining ring 260x5 normal normal 260 5 275 16.2 16 5 268 5.15 12
DIN 472 retaining ring 270x5 normal normal 270 5 285 16.2 16 5 278 5.15 12
DIN 472 retaining ring 280x5 normal normal 280 5 295 16.2 16 5 288 5.15 12
DIN 472 retaining ring 290x5 normal normal 290 5 305 16.2 16 5 298 5.15 12
DIN 472 retaining ring 300x5 normal normal 300 5 315 16.2 16 5 308 5.15 12