TSFP
Back to standards

Nut: T-slot

DIN 508

DIN 508 - Nuts for T-slots

Automatically build standard products in SOLIDWORKS with TSFP.

Outdated standard

T-slot nuts with a square base, held under the lips of the T-slot, and a narrower neck guided in the slot opening. DIN 508:2002-06 specifies steel nuts M4–M48 with coarse metric threads for DIN 650 T-slots and DIN 6379 studs. The two lower longitudinal edges of the base have 45° chamfers.

DIN 508

Geometry

×
Thread diameter
Thread pitch
Base width
Neck width
Base height
Base chamfer
Overall height
Product Thread diameter, mm Thread pitch, mm Base width, mm Neck width, mm Base height, mm Base chamfer, mm Overall height, mm
DIN 508 T-slot nut M4x5 4 0.7 9 5 3 1 6.5
DIN 508 T-slot nut M5x6 5 0.8 10 6 4 1.6 8
DIN 508 T-slot nut M6x8 6 1 13 8 6 1.6 10
DIN 508 T-slot nut M8x10 8 1.25 15 10 6 1.6 12
DIN 508 T-slot nut M10x12 10 1.5 18 12 7 2.5 14
DIN 508 T-slot nut M12x14 12 1.75 22 14 8 2.5 16
DIN 508 T-slot nut M16x18 16 2 28 18 10 2.5 20
DIN 508 T-slot nut M20x22 20 2.5 35 22 14 2.5 28
DIN 508 T-slot nut M24x28 24 3 44 28 18 4 36
DIN 508 T-slot nut M30x36 30 3.5 54 36 22 6 44
DIN 508 T-slot nut M36x42 36 4 65 42 26 6 52
DIN 508 T-slot nut M42x48 42 4.5 75 48 30 6 60
DIN 508 T-slot nut M48x54 48 5 85 54 34 6 70