TSFP
Back to standards

Washer

DIN 7989-2

DIN 7989-2 - Washers for use in structural steelwork, product grade A

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Washers for use in structural steelwork, product grade A, hardness class 100 HV, 8 mm thick at every size, with the hole and outside diameter of an ISO 7091 washer of the same size. The nominal dimensions are the same as DIN 7989-1; the two parts differ in tolerances and hardness, not in geometry. Together with DIN 7989-1 it replaced the 1974 edition of DIN 7989.

DIN 7989-2

Geometry

×
Inner diameter
Outer diameter
Thickness
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Inner diameter, mm Outer diameter, mm Thickness, mm
🔒 DIN 7989-2 washer M10 🔒 🔒 🔒
🔒 DIN 7989-2 washer M12 🔒 🔒 🔒
🔒 DIN 7989-2 washer M16 🔒 🔒 🔒
🔒 DIN 7989-2 washer M20 🔒 🔒 🔒
🔒 DIN 7989-2 washer M24 🔒 🔒 🔒
🔒 DIN 7989-2 washer M27 🔒 🔒 🔒
🔒 DIN 7989-2 washer M30 🔒 🔒 🔒