TSFP
Back to standards

Washer

ISO 10673 S

ISO 10673 S - Plain washers for screw and washer assemblies, small series, product grade A

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Plain washers for metric screw and washer assemblies, small series (type S), with a hole smaller than the thread diameter instead of the clearance hole of ISO 7092. Product grade A, hardness classes 200 HV and 300 HV. Intended for assemblies according to ISO 10644 and covering sizes M2 to M12. Types N and L have the same holes and wider outside diameters.

ISO 10673 S

Geometry

×
Inner diameter
Outer diameter
Thickness
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Inner diameter, mm Outer diameter, mm Thickness, mm
🔒 ISO 10673 S washer M2 🔒 🔒 🔒
🔒 ISO 10673 S washer M2.5 🔒 🔒 🔒
🔒 ISO 10673 S washer M3 🔒 🔒 🔒
🔒 ISO 10673 S washer M3.5 🔒 🔒 🔒
🔒 ISO 10673 S washer M4 🔒 🔒 🔒
🔒 ISO 10673 S washer M5 🔒 🔒 🔒
🔒 ISO 10673 S washer M6 🔒 🔒 🔒
🔒 ISO 10673 S washer M8 🔒 🔒 🔒
🔒 ISO 10673 S washer M10 🔒 🔒 🔒
🔒 ISO 10673 S washer M12 🔒 🔒 🔒