TSFP
Back to standards

Pin: parallel with internal thread

ISO 8735

ISO 8735 - Parallel pins with internal thread, of hardened steel and martensitic stainless steel

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Hardened parallel pins with internal thread, known as extractable or tapped dowel pins: a dowel pin with a tapped hole in one end, hardened unlike ISO 8733. A screw or a pin extractor in the tapped hole of one end pulls the pin out. The pin is a ground cylinder toleranced m6 with a surface finish of Ra 0,8 micrometres. The tapped hole has a 6H metric coarse thread with a counterbore and a 120 degree countersink at its mouth, and a slight flat or small groove along the pin may vent the trapped air. The two types share one dimension table and differ only at the plain end, which has a 15 degree lead c: type A has a crowned end with a radius equal to the diameter and is made of through hardened steel, 550 HV30 to 650 HV30, or of martensitic stainless steel grade C1, hardened and tempered to 460 HV30 to 560 HV30; type B has a flat end and is made of case hardened steel with a surface hardness of 600 HV1 to 700 HV1. Covers nominal diameters from 6 to 50 mm with threads M4 to M24 and lengths from 16 to 200 mm.

ISO 8735

Geometry

×
Pin diameter
Pin length
Internal thread diameter
Thread pitch
Internal thread length
Drill depth, min
Counterbore diameter
Counterbore depth
Threaded end chamfer
Point chamfer
End crown radius
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Type Pin diameter, mm Pin length, mm Internal thread diameter, mm Thread pitch, mm Internal thread length, mm Drill depth, min, mm Counterbore diameter, mm Counterbore depth, mm Threaded end chamfer, mm Threaded end chamfer angle Point chamfer, mm Point chamfer angle End crown radius, mm
🔒 ISO 8735 parallel pin 6x16 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x18 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x20 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x22 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x24 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x26 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x28 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x30 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x32 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x35 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x40 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x45 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x50 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x55 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x60 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x16 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x18 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x20 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x22 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x24 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x26 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x28 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x30 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x32 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x35 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x40 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x45 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x50 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x55 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 6x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x18 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x20 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x22 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x24 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x26 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x28 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x30 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x32 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x35 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x40 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x45 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x50 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x55 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x60 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x65 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x70 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x75 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x80 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x18 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x20 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x22 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x24 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x26 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x28 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x30 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x32 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x35 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x40 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x45 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x50 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x55 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x65 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x70 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x75 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 8x80 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x22 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x24 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x26 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x28 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x30 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x32 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x35 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x40 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x45 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x50 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x55 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x60 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x65 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x70 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x75 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x80 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x85 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x90 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x95 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x100 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x22 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x24 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x26 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x28 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x30 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x32 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x35 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x40 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x45 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x50 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x55 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x65 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 10x70 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒