TSFP
Back to standards

Pin: parallel with internal thread

ISO 8735

ISO 8735 - Parallel pins with internal thread, of hardened steel and martensitic stainless steel

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Hardened parallel pins with internal thread, known as extractable or tapped dowel pins: a dowel pin with a tapped hole in one end, hardened unlike ISO 8733. A screw or a pin extractor in the tapped hole of one end pulls the pin out. The pin is a ground cylinder toleranced m6 with a surface finish of Ra 0,8 micrometres. The tapped hole has a 6H metric coarse thread with a counterbore and a 120 degree countersink at its mouth, and a slight flat or small groove along the pin may vent the trapped air. The two types share one dimension table and differ only at the plain end, which has a 15 degree lead c: type A has a crowned end with a radius equal to the diameter and is made of through hardened steel, 550 HV30 to 650 HV30, or of martensitic stainless steel grade C1, hardened and tempered to 460 HV30 to 560 HV30; type B has a flat end and is made of case hardened steel with a surface hardness of 600 HV1 to 700 HV1. Covers nominal diameters from 6 to 50 mm with threads M4 to M24 and lengths from 16 to 200 mm.

ISO 8735

Geometry

×
Pin diameter
Pin length
Internal thread diameter
Thread pitch
Internal thread length
Drill depth, min
Counterbore diameter
Counterbore depth
Threaded end chamfer
Point chamfer
End crown radius
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Type Pin diameter, mm Pin length, mm Internal thread diameter, mm Thread pitch, mm Internal thread length, mm Drill depth, min, mm Counterbore diameter, mm Counterbore depth, mm Threaded end chamfer, mm Threaded end chamfer angle Point chamfer, mm Point chamfer angle End crown radius, mm
🔒 ISO 8735 parallel pin 20x50 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x55 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x65 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x70 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x75 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x80 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x85 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x90 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x95 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x100 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x120 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x140 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x160 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x180 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 20x200 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x50 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x55 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x60 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x65 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x70 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x75 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x80 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x85 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x90 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x95 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x100 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x120 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x140 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x160 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x180 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x200 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x50 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x55 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x65 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x70 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x75 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x80 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x85 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x90 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x95 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x100 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x120 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x140 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x160 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x180 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 25x200 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x60 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x65 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x70 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x75 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x80 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x85 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x90 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x95 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x100 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x120 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x140 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x160 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x180 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x200 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x60 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x65 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x70 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x75 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x80 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x85 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x90 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x95 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x100 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x120 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x140 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x160 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x180 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 30x200 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x80 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x85 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x90 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x95 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x100 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x120 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x140 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x160 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x180 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x200 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x80 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x85 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x90 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x95 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x100 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x120 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x140 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x160 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x180 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 40x200 B 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 50x100 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 50x120 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 50x140 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ISO 8735 parallel pin 50x160 A 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒 🔒