TSFP
Back to standards

Washer

ISO 8738

ISO 8738 - Plain washers for clevis pins, product grade A

Automatically build standard products in SOLIDWORKS with TSFP.

Paid access

Plain washers for clevis pins, product grade A, replacing DIN 1440: the hole still equals the pin diameter, but there are fewer sizes and most outside diameters from size 8 up are smaller. For use with ISO 2340 and ISO 2341 clevis pins on the cotter pin end.

ISO 8738

Geometry

×
Inner diameter
Outer diameter
Thickness
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Inner diameter, mm Outer diameter, mm Thickness, mm
🔒 ISO 8738 washer 3 🔒 🔒 🔒
🔒 ISO 8738 washer 4 🔒 🔒 🔒
🔒 ISO 8738 washer 5 🔒 🔒 🔒
🔒 ISO 8738 washer 6 🔒 🔒 🔒
🔒 ISO 8738 washer 8 🔒 🔒 🔒
🔒 ISO 8738 washer 10 🔒 🔒 🔒
🔒 ISO 8738 washer 12 🔒 🔒 🔒
🔒 ISO 8738 washer 14 🔒 🔒 🔒
🔒 ISO 8738 washer 16 🔒 🔒 🔒
🔒 ISO 8738 washer 18 🔒 🔒 🔒
🔒 ISO 8738 washer 20 🔒 🔒 🔒
🔒 ISO 8738 washer 22 🔒 🔒 🔒
🔒 ISO 8738 washer 24 🔒 🔒 🔒
🔒 ISO 8738 washer 27 🔒 🔒 🔒
🔒 ISO 8738 washer 30 🔒 🔒 🔒
🔒 ISO 8738 washer 33 🔒 🔒 🔒
🔒 ISO 8738 washer 36 🔒 🔒 🔒
🔒 ISO 8738 washer 40 🔒 🔒 🔒
🔒 ISO 8738 washer 45 🔒 🔒 🔒
🔒 ISO 8738 washer 50 🔒 🔒 🔒
🔒 ISO 8738 washer 55 🔒 🔒 🔒
🔒 ISO 8738 washer 60 🔒 🔒 🔒
🔒 ISO 8738 washer 70 🔒 🔒 🔒
🔒 ISO 8738 washer 80 🔒 🔒 🔒
🔒 ISO 8738 washer 90 🔒 🔒 🔒
🔒 ISO 8738 washer 100 🔒 🔒 🔒