Cincin: penahan untuk poros · DIN 471
DIN 471 retaining ring 38x1.75
DIN 471 - Retaining rings for shafts - Normal type and heavy type
Automatically build standard products in SOLIDWORKS with TSFP.
DIN 471 38x1.75
| Tipe cincin |
normal
|
|---|---|
| Diameter poros | 38 mm |
| Ketebalan | 1.75 mm |
| Diameter dalam pada keadaan bebas | 35.2 mm |
| Lebar telinga | 5.8 mm |
| Lebar radial cincin | 4.2 mm |
| Diameter lubang telinga | 2.5 mm |
| Diameter alur | 36 mm |
| Lebar alur | 1.85 mm |
| Jarak minimum dari alur ke ujung poros | 3 mm |