Pin: silindris berulir dalam · DIN 7979
DIN 7979 parallel pin C 16x160
DIN 7979 - Parallel pins with internal thread
Automatically build standard products in SOLIDWORKS with TSFP.
Standar kedaluwarsaDIN 7979 C 16x160
| Tipe |
C
|
|---|---|
| Diameter pin | 16 mm |
| Panjang pin | 160 mm |
| Diameter ulir dalam | 8 mm |
| Pitch ulir | 1.25 mm |
| Panjang ulir dalam | 12 mm |
| Kedalaman bor, min. | 20 mm |
| Diameter lubang benam | 8.4 mm |
| Kedalaman lubang benam | 1.5 mm |
| Pingul ujung berulir | 2 mm |
| Sudut pingul ujung berulir | x15 |
| Pingul ujung | 3 mm |
| Sudut pingul ujung | x15 |
| Radius ujung cembung | — mm |