Nat: rama-rama
DIN 315
DIN 315 - Fasteners - Wing nuts - Rounded wings
Automatically build standard products in SOLIDWORKS with TSFP.
Nat rama-rama bersayap bulat untuk pengetatan tangan, gred produk C, dengan ulir metrik pic kasar M4–M24. Dimensi mengikut DIN 315:2016-12; dimensi badan dan sayap ialah nilai maksimum.
| Produk | Diameter ulir, mm | Pic ulir, mm | Rentang sayap, mm | Ketinggian keseluruhan, mm | Tinggi, mm | Diameter tapak nat, mm | Diameter atas nat, mm | Ketebalan hujung sayap, mm | Ketebalan pangkal sayap, mm |
|---|---|---|---|---|---|---|---|---|---|
| DIN 315 wing nut M4 | 4 | 0.7 | 20 | 10.5 | 4.6 | 8 | 7 | 1.9 | 2.3 |
| DIN 315 wing nut M5 | 5 | 0.8 | 26 | 13 | 6.5 | 11 | 9 | 2.3 | 2.8 |
| DIN 315 wing nut M6 | 6 | 1 | 33 | 17 | 8 | 13 | 11 | 2.3 | 3.3 |
| DIN 315 wing nut M8 | 8 | 1.25 | 39 | 20 | 10 | 16 | 12.5 | 2.8 | 4.4 |
| DIN 315 wing nut M10 | 10 | 1.5 | 51 | 25 | 12 | 20 | 16.5 | 4.4 | 5.4 |
| DIN 315 wing nut M12 | 12 | 1.75 | 65 | 33.5 | 14 | 23 | 19.5 | 4.9 | 6.4 |
| DIN 315 wing nut M16 | 16 | 2 | 73 | 37.5 | 17 | 29 | 23 | 6.4 | 7.5 |
| DIN 315 wing nut M20 | 20 | 2.5 | 90 | 46.5 | 21 | 35 | 29 | 6.9 | 8 |
| DIN 315 wing nut M24 | 24 | 3 | 110 | 56.5 | 25 | 44 | 37.5 | 9.4 | 10.5 |