Sesendal
DIN 433-1
DIN 433-1 - Plain small-series washers, hardness up to 250 HV
Automatically build standard products in SOLIDWORKS with TSFP.
Standard lapukSesendal rata siri kecil mengikut DIN 433-1:1990-03 yang telah ditarik balik, kekerasan sehingga 250 HV. Penamaan berdasarkan diameter lubang. Berbeza daripada ISO 7092, ketebalan sesendal M18 ialah 2.5 mm dan diameter luar M36 ialah 58 mm. DIN 433-2 menetapkan bentuk dengan serongan dalaman.
| Produk | Diameter dalam, mm | Diameter luar, mm | Ketebalan, mm |
|---|---|---|---|
| DIN 433-1 washer 1.1 | 1.1 | 2.5 | 0.3 |
| DIN 433-1 washer 1.3 | 1.3 | 3 | 0.3 |
| DIN 433-1 washer 1.5 | 1.5 | 3 | 0.3 |
| DIN 433-1 washer 1.7 | 1.7 | 3.5 | 0.3 |
| DIN 433-1 washer 2 | 2 | 4 | 0.3 |
| DIN 433-1 washer 2.2 | 2.2 | 4.5 | 0.3 |
| DIN 433-1 washer 2.7 | 2.7 | 5 | 0.5 |
| DIN 433-1 washer 3.2 | 3.2 | 6 | 0.5 |
| DIN 433-1 washer 3.7 | 3.7 | 7 | 0.5 |
| DIN 433-1 washer 4.3 | 4.3 | 8 | 0.5 |
| DIN 433-1 washer 5.3 | 5.3 | 9 | 1 |
| DIN 433-1 washer 6.4 | 6.4 | 11 | 1.6 |
| DIN 433-1 washer 8.4 | 8.4 | 15 | 1.6 |
| DIN 433-1 washer 10.5 | 10.5 | 18 | 1.6 |
| DIN 433-1 washer 13 | 13 | 20 | 2 |
| DIN 433-1 washer 15 | 15 | 24 | 2.5 |
| DIN 433-1 washer 17 | 17 | 28 | 2.5 |
| DIN 433-1 washer 19 | 19 | 30 | 2.5 |
| DIN 433-1 washer 21 | 21 | 34 | 3 |
| DIN 433-1 washer 25 | 25 | 39 | 4 |
| DIN 433-1 washer 31 | 31 | 50 | 4 |
| DIN 433-1 washer 37 | 37 | 58 | 5 |