Engineering materials for SolidWorks: grades, delivery conditions, mechanical properties and hardness in every common scale.
Properties are available with a paid account
Grades, designations and conditions are open to everyone. Mechanical properties, analogues, sources, notes, temperature dependence and hardness scales need an active paid account.
See pricingFound: 1098
Homogeneous glued laminated timber of strength class GL28h for long-span beams and frames.
Properties, analogues, sources, notes and hardness need a paid account.
Homogeneous glued laminated timber of strength class GL32h for highly loaded long-span beams.
Properties, analogues, sources, notes and hardness need a paid account.
Combined glued laminated timber of strength class GL24c with stronger outer laminations, a common class for beams.
Properties, analogues, sources, notes and hardness need a paid account.
Oriented strand board for load-bearing use in humid conditions to EN 300: wall and roof sheathing, floors, packaging and site structures.
Properties, analogues, sources, notes and hardness need a paid account.
Oriented strand board for load-bearing use in dry conditions to EN 300: wall, partition and floor sheathing inside buildings.
Properties, analogues, sources, notes and hardness need a paid account.
Heavy-duty oriented strand board for load-bearing use in humid conditions to EN 300: floors, decks and shear diaphragms under high loads.
Properties, analogues, sources, notes and hardness need a paid account.
Structural plywood of birch veneers bonded with phenol-formaldehyde (bonding class 3) to EN 636 for load-bearing structures, vehicle floors, formwork and furniture.
Properties, analogues, sources, notes and hardness need a paid account.
Birch-faced general purpose plywood of increased water resistance to ГОСТ 3916.1 for interior and exterior use: structures, vehicle floors and formwork.
Properties, analogues, sources, notes and hardness need a paid account.
Water-resistant birch-faced general purpose plywood to ГОСТ 3916.1 for interior use: furniture, joinery, interior linings and packaging.
Properties, analogues, sources, notes and hardness need a paid account.
Laminated veneer lumber of spruce veneers all running lengthwise (Metsä Wood) to EN 14374 for beams, rafters, studs and long-span structures.
Properties, analogues, sources, notes and hardness need a paid account.
Laminated veneer lumber of spruce veneers with some crosswise plies (Metsä Wood) to EN 14374 for floor slabs, wall and roof elements and wide beams.
Properties, analogues, sources, notes and hardness need a paid account.
Particleboard for interior fitments including furniture in dry conditions to EN 312: furniture carcasses, shelves, worktops and linings.
Properties, analogues, sources, notes and hardness need a paid account.
Load-bearing particleboard for humid conditions to EN 312: floors, roof and wall sheathing.
Properties, analogues, sources, notes and hardness need a paid account.
Heavy-duty load-bearing particleboard for humid conditions to EN 312: floors and structural sheathing under high loads.
Properties, analogues, sources, notes and hardness need a paid account.
General-purpose particleboard of the higher mark of ГОСТ 10632 for furniture, joinery and interior fitments.
Properties, analogues, sources, notes and hardness need a paid account.
General-purpose dry-process fibreboard for dry conditions to EN 622-5: furniture, fronts, joinery and linings.
Properties, analogues, sources, notes and hardness need a paid account.
Load-bearing dry-process fibreboard for dry conditions to EN 622-5: wall and roof sheathing.
Properties, analogues, sources, notes and hardness need a paid account.
Heavy-duty load-bearing hardboard for humid conditions to EN 622-2: sheathing and webs of light structural members.
Properties, analogues, sources, notes and hardness need a paid account.
Clear soda-lime silicate float glass of EN 572-2 for glazing, structural glass and covers; the heat-strengthened (EN 1863-1) and thermally toughened (EN 12150-1) states raise the bending strength.
Properties, analogues, sources, notes and hardness need a paid account.
Borosilicate glass 3.3 of ISO 3585 and EN 1748-1-1 (for example SCHOTT BOROFLOAT 33) with low thermal expansion for heat- and chemical-resistant glazing, sight glasses and laboratory parts.
Properties, analogues, sources, notes and hardness need a paid account.
Dense alumina ceramic of EN 60672-3 type C 799 (GOST 20419-83 subgroup 799) with > 99 % Al2O3 for electrical insulators, wear parts and high-temperature and chemically resistant parts.
Properties, analogues, sources, notes and hardness need a paid account.
Dense alumina ceramic of EN 60672-3 type C 795 (GOST 20419-83 subgroup 795) with 95-99 % Al2O3 for electrical insulators, wear parts and high-temperature and chemically resistant parts.
Properties, analogues, sources, notes and hardness need a paid account.
Dense alumina ceramic of EN 60672-3 type C 786 (GOST 20419-83 subgroup 786) with 86-95 % Al2O3 for electrical insulators, wear parts and high-temperature and chemically resistant parts.
Properties, analogues, sources, notes and hardness need a paid account.
Yttria-stabilized tetragonal zirconia (ZrO2, Y-TZP of ISO 13356) with high strength and fracture toughness for wear parts, pump parts, dies and blades.
Properties, analogues, sources, notes and hardness need a paid account.
