Rør: elliptisk
ДСТУ EN 10210-2
ДСТУ EN 10210-2 - Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
Automatically build standard products in SOLIDWORKS with TSFP.
Varmfærdige konstruktionshulprofiler med elliptisk tværsnit, der adskiller sig fra de cirkulære og rektangulære profiler i ДСТУ EN 10210-2 ved deres omrids: udvendigt er det en ellipse H × B, hvis storakse er dobbelt så lang som lilleaksen, og indvendigt en ellipse (H − 2T) × (B − 2T) om de samme akser, så tværsnittet har en stærk og en svag akse som et rektangulært, men ingen plan side og intet hjørne. Profilet formes varmt eller formes koldt og varmebehandles bagefter, så stålet har egenskaberne af et varmvalset produkt. Standarden omfatter elliptiske former op til 500 × 250 mm; måltabellen går fra 120 × 60 til 500 × 250 mm med godstykkelser fra 3,2 til 16 mm. Tværsnitsværdierne følger af de tre angivne mål efter formlerne i anneks A.4: da den indvendige kontur er en ellipse og ikke en kurve parallel med ydersiden, er godset kun præcis T på de to akser. Identisk indførelse af EN 10210-2:2019, hvis måltabel for elliptiske profiler er den samme som i udgaven fra 2006.
| Produkt | Tværsnitshøjde, mm | Tværsnitsbredde, mm | Godstykkelse, mm | Tværsnitsareal, cm2 | Masse pr. meter, kg/m | Tværsnitsomkreds, mm | Inertimoment, stærk akse, cm4 | Inertimoment, svag akse, cm4 | Modstandsmoment, stærk akse, cm3 | Modstandsmoment, svag akse, cm3 | Plastisk modstandsmoment, stærk akse, cm3 | Plastisk modstandsmoment, svag akse, cm3 | Inertiradius, stærk akse, cm | Inertiradius, svag akse, cm | Vridningsinertimoment, cm4 | Vridningsmodstandsmoment, cm3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ДСТУ EN 10210-2 elliptical hollow section 120x60x3.2 | 120 | 60 | 3.2 | 8.726 | 6.85 | 290.597 | 123.22 | 41.364 | 20.537 | 13.788 | 28.716 | 17.605 | 3.758 | 2.177 | 124.05 | 30.776 |
| ДСТУ EN 10210-2 elliptical hollow section 120x60x4 | 120 | 60 | 4 | 10.807 | 8.484 | 290.597 | 150.324 | 49.931 | 25.054 | 16.644 | 35.285 | 21.525 | 3.73 | 2.149 | 150.193 | 36.946 |
| ДСТУ EN 10210-2 elliptical hollow section 120x60x5 | 120 | 60 | 5 | 13.352 | 10.481 | 290.597 | 182.261 | 59.739 | 30.377 | 19.913 | 43.167 | 26.167 | 3.695 | 2.115 | 180.391 | 43.91 |
| ДСТУ EN 10210-2 elliptical hollow section 120x60x6 | 120 | 60 | 6 | 15.834 | 12.429 | 290.597 | 212.125 | 68.605 | 35.354 | 22.868 | 50.688 | 30.528 | 3.66 | 2.082 | 207.989 | 50.105 |
| ДСТУ EN 10210-2 elliptical hollow section 120x60x8 | 120 | 60 | 8 | 20.609 | 16.178 | 290.597 | 265.985 | 83.747 | 44.331 | 27.916 | 64.683 | 38.443 | 3.593 | 2.016 | 256.03 | 60.438 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x4 | 150 | 75 | 4 | 13.635 | 10.703 | 363.247 | 300.831 | 100.987 | 40.111 | 26.93 | 56.085 | 34.385 | 4.697 | 2.722 | 302.857 | 60.109 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x5 | 150 | 75 | 5 | 16.886 | 13.256 | 363.247 | 367.002 | 121.902 | 48.934 | 32.507 | 68.917 | 42.042 | 4.662 | 2.687 | 366.682 | 72.159 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x6 | 150 | 75 | 6 | 20.075 | 15.759 | 363.247 | 429.792 | 141.248 | 57.306 | 37.666 | 81.288 | 49.338 | 4.627 | 2.653 | 426.183 | 83.165 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x6.3 | 150 | 75 | 6.3 | 21.019 | 16.5 | 363.247 | 447.986 | 146.757 | 59.732 | 39.135 | 84.911 | 51.458 | 4.617 | 2.642 | 443.222 | 86.273 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x8 | 150 | 75 | 8 | 26.264 | 20.617 | 363.247 | 545.679 | 175.539 | 72.757 | 46.81 | 104.683 | 62.883 | 4.558 | 2.585 | 533.048 | 102.309 |
| ДСТУ EN 10210-2 elliptical hollow section 150x75x10 | 150 | 75 | 10 | 32.201 | 25.278 | 363.247 | 649.377 | 204.461 | 86.584 | 54.523 | 126.333 | 75.083 | 4.491 | 2.52 | 625.073 | 118.043 |
| ДСТУ EN 10210-2 elliptical hollow section 180x90x6 | 180 | 90 | 6 | 24.316 | 19.088 | 435.896 | 761.015 | 252.777 | 84.557 | 56.173 | 119.088 | 72.648 | 5.594 | 3.224 | 760.351 | 124.691 |
| ДСТУ EN 10210-2 elliptical hollow section 180x90x8 | 180 | 90 | 8 | 31.919 | 25.056 | 435.896 | 974.238 | 317.906 | 108.249 | 70.646 | 154.283 | 93.323 | 5.525 | 3.156 | 961.222 | 155.443 |
| ДСТУ EN 10210-2 elliptical hollow section 180x90x10 | 180 | 90 | 10 | 39.27 | 30.827 | 435.896 | 1169.065 | 374.733 | 129.896 | 83.274 | 187.333 | 112.333 | 5.456 | 3.089 | 1139.18 | 181.708 |
| ДСТУ EN 10210-2 elliptical hollow section 200x100x6.3 | 200 | 100 | 6.3 | 28.441 | 22.326 | 484.329 | 1103.476 | 367.599 | 110.348 | 73.52 | 155.103 | 94.749 | 6.229 | 3.595 | 1104.813 | 163.443 |
| ДСТУ EN 10210-2 elliptical hollow section 200x100x8 | 200 | 100 | 8 | 35.688 | 28.015 | 484.329 | 1358.354 | 446.413 | 135.835 | 89.283 | 192.683 | 116.949 | 6.169 | 3.537 | 1346.949 | 197.132 |
| ДСТУ EN 10210-2 elliptical hollow section 200x100x10 | 200 | 100 | 10 | 43.982 | 34.526 | 484.329 | 1636.77 | 529.358 | 163.677 | 105.872 | 234.667 | 141.333 | 6.1 | 3.469 | 1604.852 | 231.968 |
| ДСТУ EN 10210-2 elliptical hollow section 200x100x12.5 | 200 | 100 | 12.5 | 53.996 | 42.387 | 484.329 | 1953.908 | 619.345 | 195.391 | 123.869 | 283.854 | 169.271 | 6.015 | 3.387 | 1889.388 | 268.952 |
| ДСТУ EN 10210-2 elliptical hollow section 220x110x6 | 220 | 110 | 6 | 29.971 | 23.527 | 532.762 | 1420.523 | 476.403 | 129.138 | 86.619 | 180.688 | 110.728 | 6.885 | 3.987 | 1429.106 | 193.241 |
| ДСТУ EN 10210-2 elliptical hollow section 220x110x8 | 220 | 110 | 8 | 39.458 | 30.975 | 532.762 | 1832.194 | 605.644 | 166.563 | 110.117 | 235.349 | 143.243 | 6.814 | 3.918 | 1824.309 | 243.839 |
| ДСТУ EN 10210-2 elliptical hollow section 220x110x10 | 220 | 110 | 10 | 48.695 | 38.225 | 532.762 | 2215.216 | 721.683 | 201.383 | 131.215 | 287.333 | 173.667 | 6.745 | 3.85 | 2183.134 | 288.489 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x6 | 250 | 125 | 6 | 34.212 | 26.856 | 605.411 | 2109.487 | 711.138 | 168.759 | 113.782 | 235.288 | 144.538 | 7.852 | 4.559 | 2130.166 | 254.543 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x6.3 | 250 | 125 | 6.3 | 35.863 | 28.153 | 605.411 | 2205.307 | 742.03 | 176.425 | 118.725 | 246.296 | 151.166 | 7.842 | 4.549 | 2223.879 | 265.33 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x8 | 250 | 125 | 8 | 45.113 | 35.414 | 605.411 | 2731.804 | 909.317 | 218.544 | 145.491 | 307.349 | 187.683 | 7.782 | 4.49 | 2733.56 | 323.311 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x10 | 250 | 125 | 10 | 55.763 | 43.774 | 605.411 | 3316.295 | 1089.875 | 265.304 | 174.38 | 376.333 | 228.417 | 7.712 | 4.421 | 3288.449 | 385.023 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x12 | 250 | 125 | 12 | 66.162 | 51.937 | 605.411 | 3864.474 | 1253.855 | 309.158 | 200.617 | 442.304 | 266.804 | 7.643 | 4.353 | 3797.624 | 440.221 |
| ДСТУ EN 10210-2 elliptical hollow section 250x125x12.5 | 250 | 125 | 12.5 | 68.722 | 53.947 | 605.411 | 3996.02 | 1292.379 | 319.682 | 206.781 | 458.333 | 276.042 | 7.625 | 4.337 | 3918.095 | 453.063 |
| ДСТУ EN 10210-2 elliptical hollow section 300x150x8 | 300 | 150 | 8 | 54.538 | 42.812 | 726.493 | 4813.289 | 1615.792 | 320.886 | 215.439 | 448.683 | 275.083 | 9.394 | 5.443 | 4845.717 | 480.875 |
| ДСТУ EN 10210-2 elliptical hollow section 300x150x10 | 300 | 150 | 10 | 67.544 | 53.022 | 726.493 | 5872.029 | 1950.438 | 391.469 | 260.058 | 551.333 | 336.333 | 9.324 | 5.374 | 5866.907 | 577.275 |
| ДСТУ EN 10210-2 elliptical hollow section 300x150x12.5 | 300 | 150 | 12.5 | 83.449 | 65.507 | 726.493 | 7119.588 | 2333.568 | 474.639 | 311.142 | 674.479 | 408.854 | 9.237 | 5.288 | 7046.518 | 686.089 |
| ДСТУ EN 10210-2 elliptical hollow section 300x150x16 | 300 | 150 | 16 | 105.055 | 82.468 | 726.493 | 8730.868 | 2808.62 | 582.058 | 374.483 | 837.461 | 503.061 | 9.116 | 5.171 | 8528.768 | 818.473 |
| ДСТУ EN 10210-2 elliptical hollow section 320x160x8 | 320 | 160 | 8 | 58.308 | 45.772 | 774.926 | 5877.121 | 1978.128 | 367.32 | 247.266 | 512.683 | 314.709 | 10.04 | 5.825 | 5927.967 | 552.691 |
| ДСТУ EN 10210-2 elliptical hollow section 320x160x10 | 320 | 160 | 10 | 72.257 | 56.721 | 774.926 | 7180.895 | 2393.108 | 448.806 | 299.139 | 630.667 | 385.333 | 9.969 | 5.755 | 7191.644 | 665.158 |
| ДСТУ EN 10210-2 elliptical hollow section 320x160x12 | 320 | 160 | 12 | 85.954 | 67.474 | 774.926 | 8422.464 | 2779.058 | 526.404 | 347.382 | 744.704 | 452.864 | 9.899 | 5.686 | 8375.419 | 768.528 |
| ДСТУ EN 10210-2 elliptical hollow section 320x160x14 | 320 | 160 | 14 | 99.4 | 78.029 | 774.926 | 9603.772 | 3137.319 | 600.236 | 392.165 | 854.859 | 517.365 | 9.829 | 5.618 | 9482.882 | 863.348 |
| ДСТУ EN 10210-2 elliptical hollow section 400x200x8 | 400 | 200 | 8 | 73.388 | 57.609 | 968.658 | 11689.419 | 3965.625 | 584.471 | 396.562 | 811.349 | 499.883 | 12.621 | 7.351 | 11858.002 | 890.203 |
| ДСТУ EN 10210-2 elliptical hollow section 400x200x10 | 400 | 200 | 10 | 91.106 | 71.518 | 968.658 | 14348.439 | 4829.413 | 717.422 | 482.941 | 1001.333 | 614.667 | 12.55 | 7.281 | 14472.575 | 1079.475 |
| ДСТУ EN 10210-2 elliptical hollow section 400x200x12 | 400 | 200 | 12 | 108.573 | 85.23 | 968.658 | 16907.177 | 5645.698 | 845.359 | 564.57 | 1186.304 | 725.504 | 12.479 | 7.211 | 16956.585 | 1256.662 |
| ДСТУ EN 10210-2 elliptical hollow section 400x200x12.5 | 400 | 200 | 12.5 | 112.901 | 88.627 | 968.658 | 17531.483 | 5842.549 | 876.574 | 584.255 | 1231.771 | 752.604 | 12.461 | 7.194 | 17557.725 | 1299.138 |
| ДСТУ EN 10210-2 elliptical hollow section 400x200x14 | 400 | 200 | 14 | 125.789 | 98.745 | 968.658 | 19368.106 | 6416.199 | 968.405 | 641.62 | 1366.325 | 832.459 | 12.409 | 7.142 | 19314.614 | 1422.337 |
| ДСТУ EN 10210-2 elliptical hollow section 480x240x10 | 480 | 240 | 10 | 109.956 | 86.315 | 1162.389 | 25172.797 | 8528.639 | 1048.867 | 710.72 | 1457.333 | 897.333 | 15.131 | 8.807 | 25511.558 | 1594.275 |
| ДСТУ EN 10210-2 elliptical hollow section 480x240x12 | 480 | 240 | 12 | 131.193 | 102.986 | 1162.389 | 29752.923 | 10014.271 | 1239.705 | 834.523 | 1730.304 | 1062.144 | 15.059 | 8.737 | 30010.332 | 1865.334 |
| ДСТУ EN 10210-2 elliptical hollow section 480x240x14 | 480 | 240 | 14 | 152.179 | 119.46 | 1162.389 | 34188.645 | 11431.5 | 1424.527 | 952.625 | 1997.259 | 1222.219 | 14.989 | 8.667 | 34321.097 | 2121.89 |
| ДСТУ EN 10210-2 elliptical hollow section 500x250x10 | 500 | 250 | 10 | 114.668 | 90.014 | 1210.822 | 28538.62 | 9681.701 | 1141.545 | 774.536 | 1584.667 | 976.333 | 15.776 | 9.189 | 28950.2 | 1738.678 |
| ДСТУ EN 10210-2 elliptical hollow section 500x250x12.5 | 500 | 250 | 12.5 | 142.353 | 111.747 | 1210.822 | 35030.369 | 11790.56 | 1401.215 | 943.245 | 1955.729 | 1200.521 | 15.687 | 9.101 | 35333.436 | 2108.351 |
| ДСТУ EN 10210-2 elliptical hollow section 500x250x16 | 500 | 250 | 16 | 180.453 | 141.656 | 1210.822 | 43708.858 | 14549.066 | 1748.354 | 1163.925 | 2458.795 | 1501.461 | 15.563 | 8.979 | 43736.963 | 2586.487 |