Stift: zylindrisch mit Innengewinde
DIN 7979
DIN 7979 - Parallel pins with internal thread
Automatically build standard products in SOLIDWORKS with TSFP.
Veraltete NormZurückgezogene deutsche Norm für Zylinderstifte mit Innengewinde, der Vorgänger von ISO 8733 und ISO 8735 mit einem breiteren Bereich bis d 80 mm und M42. Der Stift ist für Sacklöcher gedacht: Er legt zwei Teile zueinander fest, und eine Ausziehschraube oder ein Gleithammer im Gewindeloch des einen Endes zieht ihn aus einer Bohrung ohne Austritt heraus. Der Stift ist ein geschliffener Zylinder mit der Toleranz m6; das Gewindeende hat eine kurze Fase und eine Zylindersenkung mit einer 120-Grad-Kegelsenkung, die das Gewinde schützt. Die beiden Formen unterscheiden sich am glatten Ende: Form C besteht aus ungehärtetem Automatenstahl 9SMnPb28K und hat an diesem Ende eine 15-Grad-Fase, Form D ist auf 60 HRC ± 2 HRC gehärtet und hat ein balliges Ende mit einem Radius gleich dem Durchmesser und eine kurze 15-Grad-Einführschräge. Umfasst Nenndurchmesser von 6 bis 80 mm mit Gewinden M4 bis M42 und Längen von 16 bis 200 mm. Die Ausgabe von 1977 wurde 1992 durch DIN EN 28733 und DIN EN 28735 und heute durch DIN EN ISO 8733 für den ungehärteten Stift und DIN EN ISO 8735 für den gehärteten Stift ersetzt.
| Produkt | Typ | Stiftdurchmesser, mm | Stiftlänge, mm | Innengewindedurchmesser, mm | Gewindesteigung, mm | Innengewindelänge, mm | Bohrtiefe, min., mm | Senkungsdurchmesser, mm | Senkungstiefe, mm | Fase am Gewindeende, mm | Fasenwinkel am Gewindeende | Fase am Ende, mm | Fasenwinkel am Ende | Radius des balligen Endes, mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIN 7979 parallel pin C 6x16 |
C
|
6 | 16 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x20 |
C
|
6 | 20 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x24 |
C
|
6 | 24 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x28 |
C
|
6 | 28 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x32 |
C
|
6 | 32 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x36 |
C
|
6 | 36 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x40 |
C
|
6 | 40 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x45 |
C
|
6 | 45 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x50 |
C
|
6 | 50 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x55 |
C
|
6 | 55 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x60 |
C
|
6 | 60 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin D 6x16 |
D
|
6 | 16 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x20 |
D
|
6 | 20 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x24 |
D
|
6 | 24 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x28 |
D
|
6 | 28 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x32 |
D
|
6 | 32 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x36 |
D
|
6 | 36 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x40 |
D
|
6 | 40 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x45 |
D
|
6 | 45 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x50 |
D
|
6 | 50 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x55 |
D
|
6 | 55 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x60 |
D
|
6 | 60 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin C 8x20 |
C
|
8 | 20 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x24 |
C
|
8 | 24 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x28 |
C
|
8 | 28 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x32 |
C
|
8 | 32 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x36 |
C
|
8 | 36 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x40 |
C
|
8 | 40 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x45 |
C
|
8 | 45 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x50 |
C
|
8 | 50 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x55 |
C
|
8 | 55 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x60 |
C
|
8 | 60 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x70 |
C
|
8 | 70 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x80 |
C
|
8 | 80 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin D 8x20 |
D
|
8 | 20 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x24 |
D
|
8 | 24 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x28 |
D
|
8 | 28 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x32 |
D
|
8 | 32 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x36 |
D
|
8 | 36 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x40 |
D
|
8 | 40 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x45 |
D
|
8 | 45 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x50 |
D
|
8 | 50 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x55 |
D
|
8 | 55 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x60 |
D
|
8 | 60 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x70 |
D
|
8 | 70 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x80 |
D
|
8 | 80 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin C 10x24 |
C
|
10 | 24 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x28 |
C
|
10 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x32 |
C
|
10 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x36 |
C
|
10 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x40 |
C
|
10 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x45 |
C
|
10 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x50 |
C
|
10 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x55 |
C
|
10 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x60 |
C
|
10 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x70 |
C
|
10 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x80 |
C
|
10 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x90 |
C
|
10 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x100 |
C
|
10 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin D 10x24 |
D
|
10 | 24 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x28 |
D
|
10 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x32 |
D
|
10 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x36 |
D
|
10 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x40 |
D
|
10 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x45 |
D
|
10 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x50 |
D
|
10 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x55 |
D
|
10 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x60 |
D
|
10 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x70 |
D
|
10 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x80 |
D
|
10 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x90 |
D
|
10 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x100 |
D
|
10 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin C 12x28 |
C
|
12 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x32 |
C
|
12 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x36 |
C
|
12 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x40 |
C
|
12 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x45 |
C
|
12 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x50 |
C
|
12 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x55 |
C
|
12 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x60 |
C
|
12 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x70 |
C
|
12 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x80 |
C
|
12 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x90 |
C
|
12 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x100 |
C
|
12 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x110 |
C
|
12 | 110 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x120 |
C
|
12 | 120 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin D 12x28 |
D
|
12 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x32 |
D
|
12 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x36 |
D
|
12 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x40 |
D
|
12 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x45 |
D
|
12 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x50 |
D
|
12 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x55 |
D
|
12 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x60 |
D
|
12 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x70 |
D
|
12 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x80 |
D
|
12 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x90 |
D
|
12 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x100 |
D
|
12 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x110 |
D
|
12 | 110 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x120 |
D
|
12 | 120 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |