Nagel
ДСТУ EN 10230-1 T3
ДСТУ EN 10230-1 T3 - Steel wire nails - Part 1: Loose nails for general applications - Table 3: square twisted shank, circular flat and countersunk head
Automatically build standard products in SOLIDWORKS with TSFP.
Kostenpflichtiger ZugangLose Nägel aus Stahldraht mit verdrilltem Vierkantschaft und rundem Flachkopf oder Senkkopf, während die Tabellen 1 und 2 runde Schäfte haben. Der verdrillte Vierkantdraht lässt den Nagel beim Eintreiben drehen und verklemmt ihn im Holz; das charakteristische Nennmaß ist das Maß des Vierkants, weshalb die Maßreihe von den Tabellen für Runddraht abweicht. Umfasst d von 1 bis 7 mm mit Längen von 15 bis 260 mm. Identische Übernahme von EN 10230-1:1999.
Die Norm kann eingesehen werden. Die Produktmaße sind nur mit einem kostenpflichtigen Konto zugänglich.
| Produkt | Schaftdurchmesser, mm | Nagellänge, mm | Kopfdurchmesser, mm | Kopfform | Schaftart | Schaftquerschnitt |
|---|---|---|---|---|---|---|
| ДСТУ EN 10230-1 T3 nail 1x15 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1x15 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |