Goupille: cylindrique à trou taraudé
DIN 7979
DIN 7979 - Parallel pins with internal thread
Automatically build standard products in SOLIDWORKS with TSFP.
Norme obsolèteNorme allemande retirée pour les goupilles cylindriques à trou taraudé, prédécesseur de l'ISO 8733 et de l'ISO 8735 avec une gamme plus large, jusqu'à d 80 mm et M42. La goupille est conçue pour les trous borgnes : elle fixe la position relative de deux pièces, et une vis d'extraction ou un marteau à inertie vissé dans le trou taraudé d'une extrémité la retire d'un trou sans débouché. La goupille est un cylindre rectifié à la tolérance m6 ; l'extrémité taraudée porte un chanfrein court et un lamage avec une fraisure à 120 degrés qui protège le taraudage. Les deux formes diffèrent par l'extrémité lisse : la forme C est en acier de décolletage non trempé 9SMnPb28K et porte un chanfrein à 15 degrés à cette extrémité, la forme D est trempée à 60 HRC ± 2 HRC et a une extrémité bombée d'un rayon égal au diamètre et une courte entrée à 15 degrés. Couvre les diamètres nominaux de 6 à 80 mm avec des filetages de M4 à M42 et des longueurs de 16 à 200 mm. L'édition de 1977 a été remplacée en 1992 par la DIN EN 28733 et la DIN EN 28735, et aujourd'hui par la DIN EN ISO 8733 pour la goupille non trempée et la DIN EN ISO 8735 pour la goupille trempée.
| Produit | Type | Diamètre de la goupille, mm | Longueur de la goupille, mm | Diamètre du taraudage, mm | Pas de filetage, mm | Longueur du taraudage, mm | Profondeur de perçage, min., mm | Diamètre du lamage, mm | Profondeur du lamage, mm | Chanfrein de l'extrémité taraudée, mm | Angle du chanfrein de l’extrémité taraudée | Chanfrein d’extrémité, mm | Angle du chanfrein d’extrémité | Rayon de l'extrémité bombée, mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIN 7979 parallel pin C 6x16 |
C
|
6 | 16 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x20 |
C
|
6 | 20 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x24 |
C
|
6 | 24 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x28 |
C
|
6 | 28 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x32 |
C
|
6 | 32 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x36 |
C
|
6 | 36 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x40 |
C
|
6 | 40 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x45 |
C
|
6 | 45 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x50 |
C
|
6 | 50 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x55 |
C
|
6 | 55 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin C 6x60 |
C
|
6 | 60 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 1.2 | x15 | — |
| DIN 7979 parallel pin D 6x16 |
D
|
6 | 16 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x20 |
D
|
6 | 20 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x24 |
D
|
6 | 24 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x28 |
D
|
6 | 28 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x32 |
D
|
6 | 32 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x36 |
D
|
6 | 36 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x40 |
D
|
6 | 40 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x45 |
D
|
6 | 45 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x50 |
D
|
6 | 50 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x55 |
D
|
6 | 55 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin D 6x60 |
D
|
6 | 60 | 4 | 0.7 | 6 | 10 | 4.3 | 1 | 0.8 | x15 | 2.1 | x15 | 6 |
| DIN 7979 parallel pin C 8x20 |
C
|
8 | 20 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x24 |
C
|
8 | 24 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x28 |
C
|
8 | 28 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x32 |
C
|
8 | 32 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x36 |
C
|
8 | 36 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x40 |
C
|
8 | 40 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x45 |
C
|
8 | 45 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x50 |
C
|
8 | 50 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x55 |
C
|
8 | 55 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x60 |
C
|
8 | 60 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x70 |
C
|
8 | 70 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin C 8x80 |
C
|
8 | 80 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 1.6 | x15 | — |
| DIN 7979 parallel pin D 8x20 |
D
|
8 | 20 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x24 |
D
|
8 | 24 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x28 |
D
|
8 | 28 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x32 |
D
|
8 | 32 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x36 |
D
|
8 | 36 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x40 |
D
|
8 | 40 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x45 |
D
|
8 | 45 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x50 |
D
|
8 | 50 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x55 |
D
|
8 | 55 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x60 |
D
|
8 | 60 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x70 |
D
|
8 | 70 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin D 8x80 |
D
|
8 | 80 | 5 | 0.8 | 8 | 12 | 5.3 | 1.2 | 1 | x15 | 2.6 | x15 | 8 |
| DIN 7979 parallel pin C 10x24 |
C
|
10 | 24 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x28 |
C
|
10 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x32 |
C
|
10 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x36 |
C
|
10 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x40 |
C
|
10 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x45 |
C
|
10 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x50 |
C
|
10 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x55 |
C
|
10 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x60 |
C
|
10 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x70 |
C
|
10 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x80 |
C
|
10 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x90 |
C
|
10 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin C 10x100 |
C
|
10 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 2 | x15 | — |
| DIN 7979 parallel pin D 10x24 |
D
|
10 | 24 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x28 |
D
|
10 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x32 |
D
|
10 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x36 |
D
|
10 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x40 |
D
|
10 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x45 |
D
|
10 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x50 |
D
|
10 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x55 |
D
|
10 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x60 |
D
|
10 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x70 |
D
|
10 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x80 |
D
|
10 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x90 |
D
|
10 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin D 10x100 |
D
|
10 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.2 | x15 | 3 | x15 | 10 |
| DIN 7979 parallel pin C 12x28 |
C
|
12 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x32 |
C
|
12 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x36 |
C
|
12 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x40 |
C
|
12 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x45 |
C
|
12 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x50 |
C
|
12 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x55 |
C
|
12 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x60 |
C
|
12 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x70 |
C
|
12 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x80 |
C
|
12 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x90 |
C
|
12 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x100 |
C
|
12 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x110 |
C
|
12 | 110 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin C 12x120 |
C
|
12 | 120 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 2.5 | x15 | — |
| DIN 7979 parallel pin D 12x28 |
D
|
12 | 28 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x32 |
D
|
12 | 32 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x36 |
D
|
12 | 36 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x40 |
D
|
12 | 40 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x45 |
D
|
12 | 45 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x50 |
D
|
12 | 50 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x55 |
D
|
12 | 55 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x60 |
D
|
12 | 60 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x70 |
D
|
12 | 70 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x80 |
D
|
12 | 80 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x90 |
D
|
12 | 90 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x100 |
D
|
12 | 100 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x110 |
D
|
12 | 110 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |
| DIN 7979 parallel pin D 12x120 |
D
|
12 | 120 | 6 | 1 | 10 | 16 | 6.4 | 1.2 | 1.6 | x15 | 3.8 | x15 | 12 |