Clou
ДСТУ EN 10230-1 T2
ДСТУ EN 10230-1 T2 - Steel wire nails - Part 1: Loose nails for general applications - Table 2: grooved shank, circular flat and countersunk head
Automatically build standard products in SOLIDWORKS with TSFP.
Accès payantPointes en vrac en fil d'acier à tige cannelée et à tête ronde plate ou fraisée, alors que le tableau 1 a une tige lisse. Les cannelures roulées le long de la tige augmentent la résistance à l'arrachement, si bien que le tableau va jusqu'à des pointes plus longues que la tige lisse du tableau 1: dimensions d de 1,4 à 8 mm avec des longueurs de 20 à 300 mm. Reprise identique de l'EN 10230-1:1999.
La norme peut être consultée. Les dimensions des produits ne sont accessibles qu’avec un compte payant.
| Produit | Diamètre de la tige, mm | Longueur de la pointe, mm | Diamètre de la tête, mm | Type de tête | Type de tige | Section de la tige |
|---|---|---|---|---|---|---|
| ДСТУ EN 10230-1 T2 nail 1.4x20 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.4x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.4x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.4x20 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.4x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.4x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.6x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 1.8x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.2x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.2x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.4x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.4x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.4x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.4x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x70 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x70 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 2.7x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x70 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x70 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x70 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x70 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.4x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x70 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x110 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x120 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x70 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x110 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 3.8x120 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x110 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x120 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x130 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x110 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x120 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.2x130 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x120 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x140 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x120 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 4.6x140 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x120 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x140 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x120 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x140 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5x150 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5.5x140 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5.5x170 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5.5x140 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 5.5x170 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 6x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 6x160 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 6x180 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T2 nail 6x200 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |