Čavao
ДСТУ EN 10230-1 T3
ДСТУ EN 10230-1 T3 - Steel wire nails - Part 1: Loose nails for general applications - Table 3: square twisted shank, circular flat and countersunk head
Automatically build standard products in SOLIDWORKS with TSFP.
Plaćeni pristupRasuti čavli od čelične žice s uvijenim četvrtastim tijelom i okruglom plosnatom ili upuštenom glavom, dok tablice 1 i 2 imaju okruglo tijelo. Uvijena četvrtasta žica tjera čavao da se pri zabijanju okreće i zaglavi ga u drvu; nazivna karakteristična mjera je mjera četvrtastog presjeka, pa se niz mjera razlikuje od tablica za okruglu žicu. Obuhvaća d od 1 do 7 mm s duljinama od 15 do 260 mm. Istovjetno preuzimanje EN 10230-1:1999.
Norma je dostupna za pregled. Mjere proizvoda dostupne su samo uz plaćeni račun.
| Proizvod | Promjer tijela, mm | Duljina čavla, mm | Promjer glave, mm | Vrsta glave | Vrsta tijela | Presjek tijela |
|---|---|---|---|---|---|---|
| ДСТУ EN 10230-1 T3 nail 1x15 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1x15 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |