Klinec
ДСТУ EN 10230-1 T3
ДСТУ EN 10230-1 T3 - Steel wire nails - Part 1: Loose nails for general applications - Table 3: square twisted shank, circular flat and countersunk head
Automatically build standard products in SOLIDWORKS with TSFP.
Platený prístupVoľné klince z oceľového drôtu so skrúteným štvorhranným driekom a okrúhlou plochou alebo zápustnou hlavou, zatiaľ čo tabuľky 1 a 2 majú okrúhle drieky. Skrútený štvorhranný drôt núti klinec pri zatĺkaní otáčať sa a zaklíni ho v dreve; menovitý charakteristický rozmer je rozmer štvorhranu, preto sa rad rozmerov líši od tabuliek pre okrúhly drôt. Zahŕňa d od 1 do 7 mm s dĺžkami od 15 do 260 mm. Identické prevzatie EN 10230-1:1999.
Norma je dostupná na prezeranie. Rozmery výrobkov sú prístupné iba pre platený účet.
| Výrobok | Priemer drieku, mm | Dĺžka klinca, mm | Priemer hlavy, mm | Typ hlavy | Typ drieku | Prierez drieku |
|---|---|---|---|---|---|---|
| ДСТУ EN 10230-1 T3 nail 1x15 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1x15 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |