Žebelj
ДСТУ EN 10230-1 T3
ДСТУ EN 10230-1 T3 - Steel wire nails - Part 1: Loose nails for general applications - Table 3: square twisted shank, circular flat and countersunk head
Automatically build standard products in SOLIDWORKS with TSFP.
Plačljiv dostopProsti žeblji iz jeklene žice z zvitim štirirobim steblom in okroglo plosko ali ugreznjeno glavo, medtem ko imata preglednici 1 in 2 okroglo steblo. Zvita štiriroba žica pri zabijanju zavrti žebelj in ga zaklini v les; nazivna značilna mera je mera štirirobja, zato se vrsta mer razlikuje od preglednic za okroglo žico. Zajema d od 1 do 7 mm z dolžinami od 15 do 260 mm. Istoveten prevzem EN 10230-1:1999.
Standard je na voljo za ogled. Mere izdelkov so dostopne samo plačljivemu računu.
| Izdelek | Premer stebla, mm | Dolžina žeblja, mm | Premer glave, mm | Vrsta glave | Vrsta stebla | Prerez stebla |
|---|---|---|---|---|---|---|
| ДСТУ EN 10230-1 T3 nail 1x15 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1x15 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.2x20 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.4x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x25 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.6x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x30 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.7x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x35 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 1.8x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x40 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x45 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x50 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.2x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x55 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x60 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.5x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x65 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x75 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 2.8x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.1x80 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x90 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x95 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.4x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x100 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 3.8x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.2x125 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.6x130 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 4.8x150 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x160 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x175 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 5.5x200 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x180 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 6x190 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 circular flat head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x210 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |
| ДСТУ EN 10230-1 T3 nail 7x260 countersunk head | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 | 🔒 |