Standard products

DIN 125

Washer · Products: 42

DIN 125 - Flat washers

Flat washers standard.

Outdated standard

DIN 1440

Washer · Products: 38

DIN 1440 - Washers for clevis pins, product grade A

Washers for clevis pins, product grade A, medium finish. The nominal size is the pin diameter, not a thread size, and the hole matches the pin diameter. The outside diameters and thicknesses are the same as DIN 1441, which uses a wider hole.

Outdated standard

DIN 440 R

Washer · Products: 15

DIN 440 R - Washers with round hole for timber constructions

Extra large series washers with a round hole, product grade C, hardness class 100 HV, mainly for timber constructions. Superseded by DIN EN ISO 7094. Form V of DIN 440, with a square hole, is a separate standard and is not covered here.

Outdated standard

DIN 9021

Washer · Products: 17

DIN 9021 - Plain washers, large series, product grade A

Plain washers, large series, product grade A. The outer diameter is about three times the inner diameter, which spreads the load over a wider bearing surface. Superseded by ISO 7093-1.

Outdated standard