TSFP
Back to standards

Nail

ДСТУ EN 10230-1 T4

ДСТУ EN 10230-1 T4 - Steel wire nails - Part 1: Loose nails for general applications - Table 4: plain shank, lost round head

Paid access

Loose steel wire nails with a plain shank and a lost round head - the finishing nail, whose small upset head is punched below the surface and filled over. The shank sizes and lengths repeat table 1 for d from 1 to 5 mm and lengths from 10 to 140 mm; only the head is smaller, about 1.4 times the shank. Identical adoption of EN 10230-1:1999.

ДСТУ EN 10230-1 T4

Geometry

×
Shank diameter
Nail length
Head diameter
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Shank diameter, mm Nail length, mm Head diameter, mm Head type Shank type Shank section
🔒 ДСТУ EN 10230-1 T4 nail 1x10 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.2x15 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.4x20 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.4x25 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.6x25 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.6x30 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.8x30 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 1.8x40 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2x30 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2x40 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2x45 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.2x30 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.2x40 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.2x50 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.4x30 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.4x40 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.4x50 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.7x40 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.7x50 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 2.7x60 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3x50 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3x60 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3x70 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3x80 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.4x60 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.4x70 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.4x80 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.4x90 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.8x70 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.8x80 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.8x90 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 3.8x100 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.2x90 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.2x100 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.2x110 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.6x90 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.6x100 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 4.6x120 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 5x100 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 5x120 lost round head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T4 nail 5x140 lost round head 🔒 🔒 🔒 🔒 🔒 🔒