TSFP
Back to standards

Nail

ДСТУ EN 10230-1 T9

ДСТУ EN 10230-1 T9 - Steel wire nails - Part 1: Loose nails for general applications - Table 9: plain shank, countersunk head, panel pins

Paid access

Panel pins: loose steel wire nails with a plain shank and a countersunk head of 32 degrees, which lets the head sit flush in thin panelling. Covers the four small sizes d 1, 1.4, 1.6 and 1.8 mm with lengths from 15 to 40 mm. Identical adoption of EN 10230-1:1999.

ДСТУ EN 10230-1 T9

Geometry

×
Shank diameter
Nail length
Head diameter
The standard is available for viewing. Product dimensions are open only to a paid account.
Product Shank diameter, mm Nail length, mm Head diameter, mm Head type Shank type Shank section
🔒 ДСТУ EN 10230-1 T9 nail 1x15 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.4x20 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.4x25 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.4x30 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.6x20 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.6x30 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.6x40 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.8x20 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.8x25 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.8x30 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒
🔒 ДСТУ EN 10230-1 T9 nail 1.8x40 countersunk head 🔒 🔒 🔒 🔒 🔒 🔒